General - Sony ICF-CD823L Service Manual

Fm/mw/lw cd clock radio
Hide thumbs Also See for ICF-CD823L:
Table of Contents

Advertisement

SECTION 1

GENERAL

Setting the Clock
and Date
1 Set the alarm setting dial to ALARM
MODE OFF.
2 Plug in the clock radio.
The display will flash "AM 12:00" or "0:00".
3 Press CLOCK for a few seconds.
You will hear a beep and the year will start to
flash in the display.
4 Press CLOCK + or – until the correct
year appears in the display.
5 Press CLOCK once.
6 Repeat steps 4 and 5 to set the month,
day, hour, and minute.
After setting the minute, press CLOCK to start
the counting of the seconds, and you will
hear two short beeps.
• To display the year and date, press SNOOZE/
DATE/SLEEP OFF once for the date, and within
2 seconds press it again for the year. The
display shows the date or year for a few
seconds and then changes back to the current
time.
• To set the current time rapidly, hold down
CLOCK + or –.
• The clock system varies depending on the
model you own.
12-hour system: "AM 12:00" = midnight
24-hour system: "0:00" = midnight
• In step 6, when you press CLOCK after the
minute setting to activate the clock, the seconds
start counting from zero.
• When the alarm setting dial is set to ALARM
TIME SET A or B, the clock cannot be set.
To change the display to the
daylight saving time (summer time)
indication
Press D.S.T./SUMMER T.
"s" is displayed and the time indication
changes to summer time.
To deactivate the summer time function, press
D.S.T./SUMMER T. again.
— 4 —
This section is extracted from
instruction manual.

Advertisement

Table of Contents
loading

Table of Contents