Start - Motorola DROID Turbo User Manual

Start

Assemble, power on, & charge up
Your 4G nano SIM card is already installed in your phone. If you
need to replace your SIM card, follow the instructions below.
Caution: Make sure you use the correct size SIM card, and
don't use adapters with your SIM card.
1. Use your fingernail to 2. Put the nano SIM
pull out the volume keys/ card into the tray.
SIM tray.
Nano
SIM
Tips & tricks
• SIM card tray: The SIM tray is integrated with the volume
keys. Use your fingernail to find the catch under the volume
keys/SIM tray, and gently pull the tray out.
4 Start
3. Push the tray
back into your
phone.
Micro SIM
SIM
• Inserting the SIM: Put the nano SIM card into the tray with
the Verizon logo facing up. Keep the SIM flat in the tray and
push the tray back into your phone.
To turn on your phone, press and hold the Power key until the
screen turns on.
Use the Motorola Turbo Charger to charge up or top off your
phone fast.
Warning: Please use only an approved charging accessory to
charge your phone. Improper handling of the charging port, as
well as the use of an incompatible charger, may cause damage
to your phone and void the warranty.
Power
Key
3 Hours