Makita 3703 Instruction Manual page 9

Trimmer guide
Trimming, curved cuts in veneers for fur-
niture and the like can be done easily with
the trimmer guide. The guide roller rides
the curve and assures a fine cut.
Install the trimmer guide on the tool base
with the clamp screw (A). Loosen the
clamp screw (B) and adjust the distance
between the bit and the trimmer guide by
turning the adjusting screw (1 mm or about
3/64" per turn). At the desired distance,
tighten the clamp screw (B) to secure the
trimmer guide in place.
When cutting, move the tool with the guide
roller riding the side of the workpiece.
9