Download  Print this page

Wood Facing - Makita LS1212 Instruction Manual

Slide compound saw equipped with electric blade brake 305 mm (12”)
Hide thumbs

Advertisement

Table of Contents
26

8. Wood facing

Use of wood facing helps to assure splinter-free cuts in
workpieces. Attach a wood facing to the guide fence
using the holes in the guide fence.
See the figure concerning the dimensions for a sug-
gested wood facing.
Over 17mm (11/16")
1
1. Hole
CAUTION:
Use straight wood of even thickness as the wood facing.
When cutting workpieces from 107 mm (4 - 1/4") to 120
mm (4 - 3/4") high, use a wood facing to prevent a
portion of the workpiece near the guide fence from being
left uncut.
Example:
When cutting workpieces 120 mm (4 - 3/4") high,
use a wood facing with the following thickness.
Miter angle
Left and Right 45˚
Right 60˚
CAUTION:
Use screws to attach the wood facing to the guide fence.
The screws should be installed so that the screw heads
are below the surface of the wood facing.
When the wood facing is attached, do not turn the turn
base with the handle lowered. The blade and/or the
wood facing will be damaged.
Over 580mm (22-3/4")
105mm
115mm
115mm
(4-1/8")
(4-1/2")
(4-1/2")
Thickness of wood facing
Over 34 mm (1-5/16")
Over 24 mm (15/16")
Over 17 mm (11/16")
1
105mm
(4-1/8")
002234

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Makita LS1212