Makita JV2000 Instruction Manual page 10

2.
When attaching the circular guide, use
the pin, inserting it in the center hole
(arrow) and secure it with the threaded
knob. The circular guide attaches to the
base of the tool in the same manner as
the guide rule (rip fence).
Metal cutting
Always use a suitable coolant (cutting oil)
when cutting metal. Failure to do so will
cause significant blade wear.
The underside of the workpiece can be
greased instead of using a coolant. (Fig. 17).
Pic for
circular gulde
Fig. 15
Fig.
16
Fig. 17
10