Panasonic KX-PRL260B Service Manual page 47

Remove the 1 screw to remove the USB holder. (*2)
Remove the Cushion. (*2)
Remove the solders. (*2)
Remove the 8 screws to remove
the Lower Cabinet.
Remove the Soundproof Rubber.
Solders (*2)
Disconnect the connectors CN651， CN1001(*1).
Remove the solders to remove
the Main P.C.B board.
Note:
(*1) KX-PRL260/262 only
(*2) KX-PRD260/262 only
Soundproof Rubber
Main P.C.B board
(*2)
47
KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20
Connectors
(*1)
Solders
(*2)
(*1)