Download  Print this page

Makita 4303C Instruction Manual page 6

Electronic jig saw
Hide thumbs


Installing universal shank jig saw blade
Always be sure that the tool is switched off and unplugged before installing or removing
the blade.
If the universal blade clamp i s used, you
can use blades of other makes which have
a universal shank like the one shown in
the figure, with a blade width of 6.35 mm
Insert the blade into the blade holder as far
as it
will go. Make sure that the end of the
blade shank reaches the bottom of the
inner s l i t and tighten the bolt securely with
the hex wrench.
The end
the blade
shank should reach the
bottom of the inner slit
i l