Md Error Message Display Content List - Sharp MD-MT80W(S) Service Manual

MD ERROR MESSAGE DISPLAY CONTENT LIST

Display content
Error content
(Remote control)
Can' t READ* Readout of the information is not
(Can' tS) completed.
Can' t READ* Readout of the TOC information
(Can' tT) is not completed.
Can' t READ* Readout of the U-TOC information
(Can tU) is not completed.
Can't LOCK The EJECT lever cannot be locked.
(Can'tL)
Er-MD41 Judged it abnormal by the U-TOC
(Er-MD41) write test.
Er-MD80 EEPROM readout Check sum error
(Er-MD80)
TOC FORM** Abnormal data DISC detection
(Tform*)
NAME FULL The number of characters for names
(N-FULL) exceeds the specification limit.
OPEN The disc compartment is open.
(OPEN)
Error code
f: Focus error
r: READ ERR
s: Search time over
w: SD write time over
p: Time over at spindle start-up
L*: UTOC SELECTOR is Loop
a_: Address abnormal
t_: FTNO > LTNO
– 29 –
MD-MT80W/90W/90/90C
Remarks
* indicates the detailed factor.
* indicates the detailed factor.
Open lid is detected while the
system is running.