Download Print this page

Cleaner Storage; To Clean Dirt Sensor Optics - Kenmore 116.31150310 Use & Care Manual

Hide thumbs

Advertisement

VACUUM
CLEANER STORAGE
Replace hose and wand in storage position
if necessary (see Page 6 & 7).
Gather the cord and wrap it loosely around
the upper and lower cord hooks. Lock
power cord plug onto the power cord.
Store the vacuum cleaner in a dry, indoor
area, on the floor with the handle locked in
the upright position.
WARN I NG
Electrical Shock And Personal injury Hazard
Wrapping the cord too tightly
puts stress on
the cord
and can cause cord
damage.
A
damaged
cord is an electrical
shock hazard
and could cause personal injury or damage.
TO CLEAN DIRT SENSOR OPTICS
The dirt sensor optics
consist
of two optic
cells located
inside the clean out port.
Occasionally,
it may become
necessary
to clean the two optic cells to ensure
maximum
performance.
Out
Port
Sensor
It is recommended
the optic cells be
cleaned:
* When
the light stays on continuously.
* When
dirt or dust adheres
to the
optic cells.
* Whenever
the dust bag is removed.
To clean the sensor, wipe the optic cells
with a soft, dry cloth.
Never use cleaners
or liquids as they can help speed the
recoating of the optic cells and make it
necessary to clean them much sooner
than normal.
Reinstall cover.
Make sure it is completely
secured in place.
= 15 =

Advertisement

loading

This manual is also suitable for:

116.31150311