Download  Print this page

Energy Saving Tips - Kenmore 253.60722013 Use & Care Manual

Hide thumbs

Advertisement

First Steps
Energy-saving
Tips
If door must be removed:
1. Gently
lay refrigerator
on its back, on a rug or
blanket.
2. Remove two base screws and base panel. Remove
wire clips on bottom
of cabinet
3. Remove bottom
hinge screws.
4. Remove plastic top hinge cover.
5. Remove screws from top hinge.
6. Remove top hinge from cabinet.
7. Remove door and bottom
hinge from cabinet.
8. To replace
door, reverse the above order and securely
tighten
aii screws to prevent hinge slippage.
° Install the refrigerator
in the coolest
part of the room,
out of direct
sunlight and away from heating
ducts or
registers. Do not place the refrigerator
next to heat-
producing
appliances
such as a range, oven
or dishwasher.
° Level the refrigerator
so the doors close tightly.
° Do not overcrowd
the refrigerator
or block cold air vents.
Doing so causes the refrigerator
to run longer and use
more energy. Shelves should not be lined with aluminum
foil, wax paper
or paper towelincj.
Liners interfere
with
cold air circulation,
making
the refrigerator
less emcienf,
which could cause food spoilage.
° Cover foods
and wipe containers
dry before placing
them in the refrigerator.
This cuts down on moisture
build-up
inside the unit.
° Organize
the refrigerator
to reduce door openings.
Remove as many items as needed
at one time and close
the door as soon as possible.
7

Advertisement

loading

This manual is also suitable for:

253.60722014253.60722015970.44782970.44789