DriveAdjustment
Thedrivesystem consists of pulleys, a belt, andacablelinkingthe transmission t o
the drivehandle.Asthesecomponents w earadjustment m aybeneeded. T oadjust
the drivelinkageperformthe following:
1.
Rotatethe drivecablefitting located on the left upperhandleupward.See
Figure 26.
2.
3.
Figure 26
Pullthe fitting away from the handle.
Unhook the cableandremove the metalbushing from the plasticdrive
handle.SeeFigure 27.
Replace b ushing in the lowerholeandreattachthe cablethroughthe
bushingandlowerhole inthe handle.SeeFigure 28.
Rgure28
5.
Reinsert t hedrivecablefitting intothe upperhandle androtateit
downward.
6.
Startthe mowerandcheck the functionof the drivehandle.
_
AUTION:
If the driveisengaged withoutpushing on the
handleafterthisadjustmentismadereturnthe cableto its original
positionon the plasticdrivehandle.
/
/
/
Figure27
21