Advertisement
Available languages
Available languages
UNPACKING
This product requires assembly.
• Carefully remove the product and any
accessories from the box. Make sure that all
items listed in the packing list are included.
• Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
• Do not discard the packing material until
you have carefully inspected and satisfactorily
operated the product.
• If any parts are damaged or missing, please
call 1-888-266-7096
for assistance.
PACKING LIST
• Snow Thrower
• Middle Handle
• Chute Deflector
• 40V Battery
• 40V Charger
• (2) Chute Control Rod Pieces
• (2) Cam Locks
• (2) Wing Nuts
• (2) Bolts
• (2) Handle Knobs
• (1) Hitch Pin
• Operator's
Manual
,_
WARNING!
If any parts are damaged or missing do
not operate this product until the parts are
replaced. Failure to heed this warning could
result in serious personal injury.
,_
WARNING!
Do not attempt to modify this product or create
accessories not recommended
for use with this
product. Any such alteration or modification
is misuse and could result in a hazardous
condition leading to possible serious personal
injury.
,_
WARNING!
Do not insert battery pack until assembly
is complete. Failure to comply could result
in accidental starting and possible serious
personal injury.
,_
WARNING!
To prevent accidental starting, do not make any
adjustments or installations with the battery
pack inserted.
ASSEMBLING
THE HANDLE
See Figure 2.
• Align the holes on the middle handle and the
lower handle. Insert the bolts, and use the
handle knobs to tighten them.
• Align the hole on the middle handle and
the upper handle. Insert the cam locks and
tighten them with the wing nuts provided.
ASSEMBLING
THE DISCHARGE
CHUTE
See Figure 3
Push the chute deflector until the latching tabs
on both sides click into the restrict slots and
the position-joints
on both sides click into the
keyed holes.
,_
WARNING!
Make sure that the chute deflector locks
completely onto the discharge chute. An
opening between the discharge chute and the
chute deflector may allow foreign objects to be
picked up by the snow thrower and thrown in
the direction of the operator causing serious
bodily injury.
INSTALLING THE CHUTE CONTROL
ROD
See Figure 4-8.
• Position the discharge
chute so that it faces
forward.
NOTE: Align the arrow on the discharge chute
with the arrow on the housing.
• Align the holes on the directional chute arm
with the holes on the lower directional chute
arm. Insert the hitch pin. Insert the end of
the chute control rod through the keyed hole
in the bracket that is attached to the top of
the middle handle.
• Ensure that the handle of the chute control
rod points upward, and insert the rod into the
keyed hole in the back of the housing.
• Firmly push the rod into the keyed hole in the
back of the housing until it snaps into place.
• Move the handle on the chute control rod to
ensure that it moves in the same direction as
the chute.
8 -- English
Advertisement
