Leveling
Door with Adjustable
Hinge
Use the lower hinge adjustment
to fine tune the
door height and for final cabinet spacing. Use a
7/16" socket or wrench to adjust the screw at the
bottom of the lower hinge.
Adjusting
Doors for Matching
Tall
Refrigerator/Freezer
Pair
The doors may also be adjusted side to side with
the slotted hinge for aligning the doors parallel
to each other. Loosen the two bolts with a 3/8"
wrench and one screw with a Phillips screwdriver.
Shift the doors until parallel, then retighten the
screw and bolts securely. (See illustration
below.)
Lower Hinge
Adjustment
for Leveling the
Doors of the Matching
Tall Refrigerator/
Freezer Pair
To level the doors using the adjustable lower
hinge (some models):
1. If the refrigerator
door is lower than the
freezer door, raise the refrigerator
door by
turning the adjustment
screw clockwise
using a 7/16" socket wrench. (See
illustration below.)
2. If the freezer door is lower than the
refrigerator
door, raise the freezer door by
turning the adjustment
screw clockwise
using a 7/16" socket wrench. (See
illustration
below.)
To install
the shelf grommet
to the shelf:
1. With the wire shelf installed, press the
shelf grommet down onto the wire that is
anchored into the freezer wall.
Be sure to
keep the larger end of the shelf grommet
away from the wall.
2. Push the shelf grommet onto the wire until
it snaps in place.
3. Slide the shelf grommet into the grommet
already in the freezer wall until it is flush.
_!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!