HP A5820X Series Configuration Manual page 40

Hide thumbs Also See for A5820X Series:
Table of Contents

Advertisement

# Create VLAN-interface 3, assign it an IP address, and enable ARP MAD on the interface.
[DeviceA] interface vlan-interface 3
[DeviceA-Vlan-interface3] ip address 192.168.2.1 24
[DeviceA-Vlan-interface3] mad arp enable
Configure Device C
5.
# Enable MSTP globally on Device C to prevent loops.
<DeviceC> system-view
[DeviceC] stp enable
# Create VLAN 3, and add port GigabitEthernet 1/0/1 and port GigabitEthernet 1/0/2 to VLAN 3 to
forward ARP MAD packets.
[DeviceC] vlan 3
[DeviceC-vlan3] port gigabitethernet 1/0/1 gigabitethernet 1/0/2
[DeviceC-vlan3] quit
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

A5800 series

Table of Contents