What you need
•
A Bluetooth device which supports
Bluetooth profile A2DP, AVRCP and with
Bluetooth version as 4.0.
•
The maximum operational range between
this product and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press
on the remote control to switch
this product to Bluetooth mode.
» BT is displayed on the display panel,
blinking.
2
On the Bluetooth device, switch on
Bluetooth, search for and select PHILIPS
HTL7140 to start connection (see the
user manual of the Bluetooth device on
how to enable Bluetooth).
» During connection, BT on the display
panel blinks.
3
Wait until this product beeps.
» When the Bluetooth connection succeeds,
BT is displayed on the display panel.
» If the connection fails, BT on the
display panel blinks continuously.
4
Select and play audio files or music on
your Bluetooth device.
•
During play, if a call is coming, music
play is paused.
•
If your Bluetooth device supports
AVRCP profile, on the remote control
you can press
/
to skip to a track,
or press
to pause/resume play.
5
To exit Bluetooth, select other source.
•
When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•
The music streaming may be interrupted by obstacles
between the device and this product, such as wall,
metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
•
If you want to connect this product with another
Bluetooth device, press and hold
on the remote
control to disconnect the currently connected
Bluetooth device.
Page 10