Setting Rapid Heating; Time-Setting Options; Setting The Time-Setting Options ­ In Brief; Setting The Timer - Siemens HB36LB.60 Instruction Manual

Press the † button.
4.
Appliance operation begins.
RQ
3 0
FOHDQ
RII
Once the dish is ready, switch the oven off with the
5.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Calling up the heating temperature
Press the button briefly. The current heating temperature in
±
the cooking compartment is displayed for several seconds.
Opening the oven door
Operation is suspended. The
is closed again, operation resumes.
Pausing operation
Press the button briefly. The oven is paused. The
†
flashes. To resume, press the
lights up. The programme will then continue.
Cancelling operation
Press and hold the button until the
†
and 160 °C appear. You can make new settings.
Setting the cooking time
See section Time-setting options, setting the cooking time.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.

Time-setting options

You can call up the time-setting options menu by pressing
the button. The following functions are available:
0
If the oven is switched off:
= Set timer
Q
■
0 = Set clock
■
If the oven is switched on:
= Set timer
Q
■
= Set cooking time
x
■
y = Set a later end time
■
Setting the time-setting options ­ in brief
Press the 0 button repeatedly until the arrow is next to the
1.
required symbol, e.g. set cooking time function =
Set the desired value with the rotary selector.
2.
Press the button repeatedly until the
0
3.
disappears from the clock display.
A detailed description of how to adjust each individual function
is provided below.
10
ƒ&NJ
‡
button flashes. When the door
†
†
button again. The
† †
symbol for 3D hot air
:
Nx
rotary symbol
Î

Setting rapid heating

Rapid heating is not suitable for all types of heating.
Suitable types of heating
3D hot air
:
Top/bottom heating
%
HydroBaking
'
Pizza setting
;
VWDUW
VWRS
A short signal sounds to indicate that the selected type of
heating is not suitable for rapid heating.
Suitable temperatures
button.
Rapid heating will not work if the temperature is set to less than
100 °C. If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid heating is
not necessary. It will not switch on.
Setting rapid heating
Press the h button to activate rapid heating. The
appears next to the temperature. Rapid heating begins. The
temperature indicator bars start filling in.
Once all the bars are filled, rapid heating is complete. You will
hear a short signal. The
in the cooking compartment.
Notes
Rapid heating is cancelled if you change the type of heating.
■
If a cooking time has been set, this runs independently of
button
■
rapid heating and counts down immediately when operation
button
is started.
You can use the
■
compartment temperature during rapid heating.
To ensure an even cooking result, do not place your dish in
■
the cooking compartment until rapid heating is complete.
Cancelling rapid heating
Press the button. The symbol goes out.
h
Short audible signal
If you cannot change or set a value, you will hear a short
audible signal.

Setting the timer

The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
Press the
0
1.
The time-setting options menu appears. The
to the symbol for the timer. The
Q
the two dots indicates that the cooking time can be set using
the rotary selector.
Set the running time for the timer using the rotary selector.
2.
Press the 0
3.
.
disappears from the clock display.
You can see the time counting down in the clock display.
When the time has elapsed
A signal sounds. The time on the timer has reached
Press the button. The display goes out.
0
symbol goes out. Place your dish
c
± button to check the current cooking
button.
Î
button repeatedly until the
c symbol
N arrow is next
rotary symbol above
Î rotary symbol
: .
‹ ‹‹