Travel Trunk and Saddlebags
Insert the ignition key into the lid lock [A], turn the key
counterclockwise [B], and pull the knob [C] outward. The
lid will open.
While pulling the knob [A] up, close the lid [B], release the
knob, and then turn the key clockwise [C].
Pull the knob to make sure the lid is locked.
Do not slam the lid shut. Otherwise the lid will not
latch and could damage.
Open the lid [A] (see Lid Unlatching in this section).
Unscrew the bolts [B].
Close the lid (see Lid Latching in this section).
Lift the saddlebag [C] to clear the bottom stoppers, and
remove the bag.
Fit the stoppers on the bottom of the saddlebag into the
dampers [A] in the saddlebag stay (lower).
Fit the hook [A] behind the bag [B] into the catch [C] on
the saddlebag stay (upper) [D]. At this point, the bag is
free to move on the mounts.