Yamaha XMax YP400RXMAx YP400RA Owner's Manual page 20

INSTRUMENT AND CONTROL FUNCTIONS
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
3
Engine trouble warning light "
This warning light comes on if an elec-
trical circuit monitoring the engine is
not working correctly. If this occurs,
have a Yamaha dealer check the self-
diagnosis system.
The electrical circuit of the warning
light can be checked by turning the key
to "ON". The warning light should
come on for a few seconds, and then
go off.
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
TIP
This warning light will come on when
the key is turned to "ON" and the start
switch is pushed, but this does not in-
dicate a malfunction.
EAU11081
" ABS warning light "
models)
In normal operation, the ABS warning
light comes on when the key is turned
to "ON", and goes off after traveling at
a speed of 10 km/h (6 mi/h) or higher.
EAU43024
"
If the ABS warning light:
 does not come on when the key is
turned to "ON"
 comes on or flashes while riding
 does not go off after traveling at a
speed of 10 km/h (6 mi/h) or high-
er
The ABS may not work correctly. If any
of the above occurs, have a Yamaha
dealer check the system as soon as
possible. (See page 3-12 for an expla-
nation of the ABS.)
WARNING
If the ABS warning light does not go
off after traveling at a speed of 10
km/h (6 mi/h) or higher, or if the
warning light comes on or flashes
while riding, the brake system re-
verts to conventional braking. If ei-
ther of the above occurs, or if the
warning light does not come on at
all, use extra caution to avoid possi-
EAUM3381
" (for ABS
ABS
ble wheel lock during emergency
braking. Have a Yamaha dealer
check the brake system and electri-
cal circuits as soon as possible.
TIP
The ABS warning light may come on
while accelerating the engine with the
scooter on its centerstand, but this
does not indicate a malfunction.
Immobilizer system indicator light
The electrical circuit of the indicator
light can be checked by turning the key
to "ON". The indicator light should
come on for a few seconds, and then
go off.
EWA16041
If the indicator light does not come on
initially when the key is turned to "ON",
or if the indicator light remains on, have
a Yamaha dealer check the electrical
circuit.
When the key is turned to "OFF" and
30 seconds have passed, the indicator
light will start flashing indicating the im-
mobilizer system is enabled. After 24
3-4
EAU38625