Makita 6933FD Instruction Manual page 11

ASSEMBLY
1
2
1. Socket
2. Anvil
CAUTION:
• Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out any
work on the tool.
Selecting correct socket
Always use the correct size socket for bolts and nuts. An
incorrect size socket will result in inaccurate and inconsistent
fastening torque and/or damage to the bolt or nut.
Installing or removing socket
004372
To install the socket, push it onto the anvil of the tool until it
locks into place.
To remove the socket, simply pull it off.
11