Product Description And Specifications; Product Features - Bosch GKS 18 V-LI Professional Original Instructions Manual

OBJ_BUCH-755-004.book Page 16 Tuesday, January 15, 2013 3:25 PM
16 | English
 Do not operate the power tool stationary. It is not de-
signed for operation with a saw table.
 Do not use high speed steel (HSS) saw blades. Such saw
blades can easily break.
 Do not saw ferrous metals. Red hot chips can ignite the
dust extraction.
 When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e.g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 Use only original Bosch batteries with the voltage list-
ed on the nameplate of your power tool. When using oth-
er batteries, e.g. imitations, reconditioned batteries or
other brands, there is danger of injury as well as property
damage through exploding batteries.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Lock-off button for On/Off switch
2 On/Off switch
3 Battery pack*
4 Blade guard
5 Lever for retracting blade guard
6 Base plate
1 609 92A 019 | (15.1.13)
7 Retracting blade guard
8 Parallel guide
9 Cutting mark, 0°
10 Cutting mark, 45°
11 Wing bolt for bevel-angle preselection
12 Wing bolt for parallel guide
13 Scale for mitre angle
14 Spindle lock button
15 Auxiliary handle (insulated gripping surface)
16 Allen key
17 Handle (insulated gripping surface)
18 Saw spindle
19 Mounting flange
20 Saw blade*
21 Clamping flange
22 Clamping bolt with washer
23 Marks on the blade guard
24 Battery unlocking button
25 Fastening screw for extraction adapter
26 Extraction adapter
27 Vacuum hose*
28 Cutting-depth scale
29 Clamping lever for cutting-depth preselection
30 Set of screw clamps*
31 Button for charge-control indicator*
32 Battery charge-control indicator*
33 Guide rail*
34 Connection piece*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Circular Saw
Article number
Rated voltage
No-load speed
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Tooth thickness/setting, max.
Tooth thickness/setting, min.
Mounting bore
Weight according to
EPTA-Procedure 01/2003
* dependent of the battery pack being used
GKS 18 V-LI
3 601 F6H 0..
V= 18
-1
min 3900
mm 51
mm 40

mm 146 x 272
mm 165
mm 160
mm 1.7
mm 2.6
mm 2.0
mm 20
kg 3.9/4.1*
Bosch Power Tools