Call Log; Do Not Disturb - NEC SL1100 Quick Start Manual

Call Log

Use the LEFT NAVIGATION ARROW to see
received and missed call log. Use the UP/DOWN
NAVIGATIONS arrows to scroll to the desired
number and simply pick up the handset to dial or
press SPEAKER to dial in hands free mode.
Redial
Press the RIGHT NAVIGATION ARROW key and
use the UP/DOWN NAVIGATIONS arrows to scroll
to the desired number and simply pick up the
handset to dial or press SPEAKER to dial in hands
free mode.
To Page
Page to All Handsets:
Lift handset and Dial 7 0 1 0.
Wait for the tone and then speak, hang-up to end
the Page.
Page to Speaker/Amplifier:
Lift handset and Dial 7 0 3 0.
Wait for the tone and then speak, hang-up to end
the Page
Call Forward - Immediate (All
Calls)
TO SET:
Press SPEAKER 7 4 1 + 1.
Enter PHONE NUMBER (0 for External) then press
SPEAKER to exit.
TO CANCEL:
Press SPEAKER 7 4 1 + 0. Then press the
SPEAKER button to exit.
Call Forward - Busy/No Answer
TO SET:
Press SPEAKER 7 4 4 + 1.
Enter PHONE NUMBER (0 for External) then press
SPEAKER to exit.
TO CANCEL:
Press SPEAKER 7 4 4 + 0. Then press the
SPEAKER button to exit.

Do Not Disturb

Press the DND button and press the SET soft key,
then select which calls you would like to DND:
Lift handset.
*
Press #.
Call Pickup (Direct)
* *
Lift handset. Dial then the extension number to
pick up.
Program System Speed Dial
Press the SPEAKER button then dial 7 5 3.
Enter the Speed Dial shortcut number from 000 to
9999.
Enter the telephone number then press the HOLD
button.
Enter the Name of the Speed Dial by using the
Keypad (see diagram) then press the HOLD button.
Press the SPEAKER button to exit.
Note: DND button = Delete. # = Consecutive letter
on same key. ## = Space. To clear a Speed Dial,
dial 7 5 3 and enter the speed dial shortcut number
then press the EXIT button, press SPEAKER
button to Exit Speed Dial.
Program Station Speed Dial
Press the SPEAKER button then dial 7 5 5.
Enter the Speed Dial shortcut number from 0 to 9.
Enter the telephone number (with a 0 before the
number for external, 0 only required for Station
Speed Dial) then press the HOLD button.
Enter the Name of the Speed Dial by using the
Keypad (see diagram) then press the HOLD button.
Press the SPEAKER button to exit.
Note: DND button = Delete. # = Consecutive letter
on same key. ## = Space. To clear a Speed Dial,
dial 7 5 3 and enter the speed dial shortcut number
then press the EXIT button, press SPEAKER
button to Exit Speed Dial.
Dialling System Speed Dials
from Directory
Press the down navigation DIRECTORY button.
Start to type in the name you are searching.
3