Rf Exposure Compliance - RCA BR200V Instruction Manual

28
translated, stored in a retrieval system, distributed,
or transmitted in any form or by any means,
electronic or mechanical, for any purpose without
the expressed, written permission from RCA
Communications Systems.
The end-user of any two-way radio is solely responsible
for obtaining any license or other authorizations
required by the Federal Communications Commission
(FCC). For further information visit www.fcc.gov or
call 1-888-CALL-FCC (1-888-225-5322).

RF Exposure Compliance

To control your exposure and ensure compliance
with the occupational/controlled environment
exposure limits always adhere to the following
procedures.
Guidelines:
Do not remove the RF Exposure Label from the
device.
User awareness instructions should accompany
device when transferred to other users.
BR200 TM Professional Two-Way Radio Instruction Manual
Copyright © 2015 RCA Communications Systems
Do not use this device if the operational requirements
described herein are not met.
Operating Instructions:
Transmit no more than the rated duty factor of
50% of the time. To transmit (talk), push the Push-
To-Talk (PTT) button. To receive calls, release the
PTT button.
Transmitting 50% of the time, or less, is important
because this radio generates measurable RF energy
exposure only when transmitting (in terms of
measuring for standards compliance). Hold the
radio in a vertical position in front of face with
the microphone (and the other parts of the radio,
including the antenna) at least one inch (2.5 cm)
away from the mouth. Keeping the radio at the
proper distance is important because RF exposures
decrease with distance from the antenna. Antenna
should be kept away from eyes.
When worn on the body, always place the radio
in an approved clip, holder, holster, case, or body
harness designed for this product.