Makita 9560CV Instruction Manual page 7

ASSEMBLY
Installing and removing wheel cover
Installing
Pull the lever in the direction of the arrow after loosening the screw.
Install the wheel cover on the bearing box by adjusting the convex of the wheel cover to
Turn the wheel cover by 180 degrees. Fasten it with the screw after pulling the lever the
For the working purpose, the setting angle of the wheel cover can be adjusted with the
Removing wheel cover
Follow the installation procedure in reverse to remove the wheel cover
the concave of the bearing box.
direction of the arrow.
lever
Shaft lock
Press the shaft lock to prevent spindle rota-
tion when installing or removing acces-
sories.
CAUTION:
Never actuate the shaft lock when the
spindle is moving. The tool may be dam-
aged.
Installing side grip (auxiliary handle)
Screw the side grip on the tool securely.
The side grip can be installed on either side
of the tool, whichever is convenient.
Shaft lock
7