Advertisement
Operation
1 )
When using without your power tool
connected :
To start the dust collector, press the
"ON'
side of the switch. Press the
"OFF" side of the switch to stop.
2
When using with your power tool con-
nected :
T h i s dust collector has an outlet for ac-
cepting the plug of your power tool.
When your power tool
is
plugged into
this outlet and the dust collector is
switched on, the dust collector will be
in
i t s
"AUTO-ON" condition and will
start or stop automatically when you
turn your power tool on or off.
Switch
OUl
CAUTION :
0
Maximum input of power tools which can be connected t o the dust collector
i s
12 A.
Check the power tool nameplate carefully before you attempt t o connect the power
tool.
0
Always be sure that the dust collector and your power tool are switched off and un-
plugged before connecting your power tool to the dust collector.
Overload protector
The overload protector on the dust col-
lector automatically cuts out to stop the
dust collector and your power tool, when-
ever heavy work i s prolonged. If this
occurs, switch off both the dust collector
and your power tool, and wait 20
-
30
seconds before pressing the restart button
to resume operation.
CAUTION :
Do
not keep the restart button pressed with tape,
etc.
6
Advertisement
