Water Spray - GE 169234 Manual

Water spray

noTE: This function can be used anytime and does not have any effect on other
settings. It can be used to help iron heavy fabrics or difficult areas (collars, pockets,
sleeves, creases, etc). It can also be used when ironing delicate fabrics, which cannot
be steam ironed.
• Fill the iron with water ( filling the iron with water).
• Set the temperature ( Setting the temperature).
• Aim the spray nozzle (1) at the garment and then press the spray
A spray of water is emitted from the spray nozzle (1) (ill. h ).
•
noTE: The spray function only works when water has been filled into the reservoir (12).
If the spray is being used for the first time, or if the iron has been standing for some
time, you may need to press the spray
pump before it works correctly.
steam blast
noTE: This function provides an extra amount of steam to remove stubborn creases.
for extra stubborn creases, wait a few seconds before pressing the steam blast
button (6) again. We recommend pressing the steam blast
seconds.
noTE: This function only works when there is water in the water reservoir (12) and the
iron is set for steam output.
• Fill the iron with water ( filling the iron with water).
• Set the temperature ( Setting the temperature).
• Press the steam blast
A blast of steam is released from the nozzles in the soleplate (15) (ill. i ).
•
noTE: The iron might be too hot for some fabrics when using the steam setting.
Iron-169234-04 (GB).indd 9
OPERATION
button (7) a few times to prime the spray
button (6).
9
button (7).
button (6) every 2-3
5/13/10 9:15 AM