Canon DC310 Instruction Manual page 74

CANNOT USE DISC
USE OF A RECOMMENDED DISC IS
ADVISED
- The disc cannot be used. We
recommend that you use a disc that
has been tested (
CARD ERROR
- A memory card error occurred. The
camcorder cannot record or display the
image. The error may be temporary. If
the message disappears after 4
seconds and
the camcorder off, remove the card and
reinsert the card. If
green, you can resume recording/
playback.
CARD FULL
- Memory card is full. Erase some images
( 55) to free some space or replace
the memory card.
CHANGE THE BATTERY PACK
- Battery pack is exhausted. Replace or
charge the battery pack (
DISC ACCESS FAILURE CHECK THE
DISC
- There was an error when reading the
disc or attempting to write onto it. Try
cleaning the disc or replace it (
- This message can also appear if
condensation has formed. Wait until the
camcorder dries completely before
resuming use (
- The disc may not be loaded correctly.
Try removing the disc and reinserting it
( 26).
DISC COVER IS OPEN
- Verify the disc is correctly inserted and
close the disc cover (
DISC FULL
- The disc is full ("
the screen). Delete some recordings
(DVD-RW in VR mode) to free some
space (
DISC IS FINALIZED
CANNOT RECORD
- You cannot record additional scenes on
a finalized DVD-R/DVD-R DL disc.
- You cannot record additional scenes or
unfinalize a DVD-RW disc in VIDEO
Downloaded From VideoCamera-Manual.com Manuals
74 •
Additional Information
6).
appears in red, turn
changes to
18).
79).
26).
END" appears on
36) or replace the disc.
mode that was finalized with another
digital device.
DISC MUST BE FINALIZED TO PLAY
BACK IN COMPATIBLE PLAYERS
- Be sure to finalize the disc and check
the compatibility of the device before
playing back the disc on external DVD
devices (
LOADING THE DISC
- The disc is being read. Wait before you
start recording.
NAMING ERROR
- The folder and file numbers have
reached their maximum value. Set the
[FILE NOS.] option to [RESET] and
erase all the images on the memory
card (
NO CARD
- There is no memory card in the
camcorder (
NO DISC
- No disc is loaded. Insert a disc (
- This message can also appear if
condensation has formed. Wait until the
camcorder dries completely before
resuming use (
77).
NO IMAGES
- No images are recorded on the memory
card.
PRINT ORDER ERROR
- You attempted to set more than 998 still
images in the print order (
REACHED THE MAXIMUM NUMBER OF
SCENES
- The maximum number of scenes has
been reached. Delete some recordings
(DVD-RW in VR mode) to free some
space (
RECOVERING DATA
PLEASE WAIT...
- Data on the disc is being recovered.
Wait until this message disappears
before resuming use.
TASK IN PROGRESS DO NOT
DISCONNECT THE POWER SOURCE
- The camcorder is updating important
file allocation data on the disc. Do not
disconnect the compact power adapter
or remove the battery pack.
48).
55) or initialize it (
28).
79).
60).
36) or replace the disc.
59).
26).