General - Sony ICF-C490 Service Manual

RADIO BUZZER
HOLD CLOCK OFF
ALARM TIME/CLOCK SET
TIME SET
FAST FAST
ALARM
RADIO BUZZER
Indicator
Indicateurs
Anzeige
BUZZER VOLUME
A
Stand
Support
Ständer
There is a tactile dot beside volume to show the
direction to turn up the volume.
Un point tactile, situé à côté de la molette de volume,
indique le sens dans lequel il faut tourner pour
augmenter le volume.
Neben dem Lautstärkeregler befindet sich ein
fühlbarer Punkt. Dieser gibt die Richtung an, in der
man die Lautstärke erhöht.
SECTION 1

GENERAL

RADIO BUZZER
RADIO+BUZZER
ALARM
ALARM MODE
RESET
RADIO
OFF
SLEEP
RADIO
ON
SNOOZE
BRIGHTNESS
LOW HIGH
AC power cord
Cordon d'alimentation
secteur
Netzkabel
FM wire antenna
Fil d'antenne FM
UKW-Wurfantenne
BAND
AM FM
VOL TUNING
Setting the Clock
To control the visibility of the display, set
BRIGHTNESS for the display to HIGH or LOW
according to your preference.
1
Plug in the clock radio.
The display will flash "AM 12:00" or "0:00".
2
Set the ALARM TIME/CLOCK SET
switch to CLOCK.
3
Press FAST+, FAST– or + to adjust the
time.
When you press FAST+, the time is raised
rapidly.
When you press FAST–, the time is lowered
rapidly.
When you press +, the time is raised in one-
minute steps.
4
Set the ALARM TIME/CLOCK SET
switch to HOLD.
Make sure that the ALARM TIME/CLOCK SET
switch is set to HOLD. When it is set to HOLD,
you cannot see the red label underneath.
Otherwise, the displayed time might be
changed if FAST+, FAST– or + happens to be
pressed.
The clock system varies depending on the model
you own.
12-hour system: "AM 12:00"=midnight
24-hour system: "0:00"=midnight
To display minute and second, press SNOOZE.
Example: When the current time is 7:15:10, the
display will become:
7 : 1 5 , 5 : 1 0
Lower of minute digit Second digits
The display returns to the current time when you
release SNOOZE.
To adjust the time exactly to the second, press +
briefly with the time signal.
ICF-C490
This section is extracted from
instruction manual.
3