Operation - Makita BSS730 Instruction Manual

Equipped with electric blade brake 185 mm (7-1/4”)
Table of Contents

Advertisement

1
2
4
3
1. Saw blade
2. Hex bolt
3. Outer flange
4. Inner flange
1
1. Hex wrench

OPERATION

To install the blade, follow the removal procedure in reverse.
001448
BE SURE TO TIGHTEN THE HEX BOLT CLOCKWISE
SECURELY.
When changing blade, make sure to also clean upper and
lower blade guards of accumulated sawdust. Such efforts do
not, however, replace the need to check lower guard opera-
tion before each use.
Hex wrench storage
001456
When not in use, store the hex wrench as shown in the figure
to keep it from being lost.
CAUTION:
Always insert the battery cartridge all the way until it
locks in place. If you can see the red part on the upper
side of the button, it is not locked completely. Insert it
fully until the red part cannot be seen. If not, it may
accidentally fall out of the tool, causing injury to you or
someone around you.
Be sure to move the tool forward in a straight line gently.
Forcing or twisting the tool will result in overheating the
motor and dangerous kickback, possibly causing severe
injury.
If the tool is operated continuously until the battery
cartridge has discharged, allow the tool to rest for 15
minutes before proceeding with a fresh battery.
15

Advertisement

Table of Contents
loading

Table of Contents