Installation; Bench Mounting - Makita BLS820 Instruction Manual

INSTALLATION

1
2 3
1. Base
2. Hex bolt
3. Auxiliary plate
1 2
3 4
1. Auxiliary plate
2. Base
3. Hex bolt
4. Nut
1
1. Stopper pin
1. Bolt
8
Installing auxiliary plate
001823
Installing the auxiliary plate using the notch in the tool's base
and secure it by tightening the hex bolt.
001832

Bench mounting

When the tool is shipped, the handle is locked in the lowered
001847
position by the stopper pin. Release the stopper pin by lower-
ing the handle slightly and pulling the stopper pin.
This tool should be bolted with two bolts to a level and stable
001857
surface using the bolt holes provided in the tool's base. This
will help prevent tipping and possible injury.
1