Secondary Air Tube Replacement Inst; Replacement Parts List - Lopi Answer Owner's Manual

M
AINTAINING
P 32
AGE
Secondary Air Tube Replacement Instructions
REMOVING THE
SECONDARY AIR TUBES
Follow the directions to the right.
To remove the front tube, the
baffle firebricks and front baffle
support must be removed first.
NOTE: When replacing, make sure the
two holes on the secondary air tube
sleeve line up with the hole on the
secondary air tube and the hole on the
air tube stub welded to the side air
channel.
R P
EPLACEMENT
PART
Door Gasket
Glass Gasket
Door Glass
Firebrick
Secondary Air Tube
Front Baffle Support
Handle for Door
Door Handle
Door Cam
Air Control Handle
Owner's Manual
Cast Glass Retainer
Air Control Slider
Air Control Floating Plate with Springs
Y A
OUR
Slide the secondary air tube to the right
until it disengages from the left side.
L
ARTS IST
(C
PPLIANCE ONTINUED
Pry out both pins on the secondary
air tube sleeve (use a screwdriver).
Slide the secondary air
tube sleeve to the left.
Side Air Channel
(Welded to side of Firebox)
PART DESCRIPTION
Black 7/8" dia. Fiberglass Rope 54" Long
Black 3/4" x 1/8" Fiberglass Channel Tape 47" Long
5 mm Neoceram, 9" Tall @ Center, 15 1/2" Wide
1 1/4" x 4 1/2" x 9" - Some firebrick will require cutting
16 5/8" long with holes every 3/4"
17 5/8" long, 1 1/2" L bar + 1" Strip
Brass spring
Steel shaft with threaded end
Cast Brass
Brass spring
This Document
Fits within door with ten screws
Steel plate with air control rod
4 springs and the floating plate used to guide air control slider
)
1.
Pin
2.
Air Tube Stub
(welded to the
side air channel)
3.
4.
Secondary Air
Tube Sleeve