Mp3/Wma Cd Operation - Sanyo DC-DA1450M Instruction Manual

To start play from the desired track
Select the track by using the e or f button in the stop or play mode.
The unit will start play automatically from the selected track.
Using the remote control
For normal music CD:
Press two number buttons within 5 seconds.
Example:
To select No. 3, press 0, 3.
To select No. 10, press 1, 0.
To select No. 32, press 3, 2
For MP3/WMA CD:
Press three number buttons within 5 seconds.
Example:
To select No. 3, press 0, 0, 3.
To select No. 10, press 0, 1, 0.
To select No. 125, press 1, 2, 5.
Temporarily stopping play
Press the i button, the elapsed playing time blinks on the display.
To resume play, press this button again.
Skip play
To skip to track 6 while track 3 is playing, press the e button repeatly
until "6" appears on the display. To skip back to track 3 while track 6 is
playing, press the f button repeatly until "3" appears.
Search (forward/reverse)
If the f or e button is pressed during play, the player will search at
high speed in the forward or reverse direction while the button is being
pressed. When the button is released, normal play will continue.
Repeat play (Remote control only)
Press the FM MODE REPEAT button on the remote control.
Each time this button is pressed, result is as below:
"RPT" blinks, repeat current
track while playing.
Press this button once again to cancel repeat play, "RPT" disappears.
Programmed play
Up to 32 tracks on a disc can be programmed for play in any order.
- First, select "CD" function and load a disc that you want to programmed
in the stop mode.
- The tracks must be programmed in the stop mode.
- The same track can be programmed more than once.
1. Press the MEMORY button.
2. Press the number buttons (or f or e button) to select a track.
3. Press the MEMORY button.
4. Repeat steps 2-3 to programme additional tracks.
5. Press the i button to start programmed play.
"RPT" remains.
Repeat all tracks or all pro-
grammed tracks while playing.
When all programmed tracks have been played, the player stops
automatically. Following display appears.
- The programme contents are retained in memory.
- Any attempt to programme more than 32 tracks will result in "FULL"
being displayed and discontinuation of the programming.
- The programme contents are retained even if the function is changed.
After selecting "CD" function press the MEMORY button, the
programmed contents appears.
- To cancel programmed play, press the n button twice.
Checking the programme
Each time the MEMORY button is pressed in the stop mode, the
programmed details sequentially appears on the display.
Changing a programme
To add a new track to a programe:
1. In the stop mode, press the MEMORY button repeatedly until following
appears on the display:
2. Select a track by pressing f or e button or number buttons on
the remote control as explained above.
3. Press the MEMORY button.
To change a track:
1. In the stop mode, press the MEMORY button repeatedly until the track
number to be replaced is displayed.
2. Select a track by pressing f or e button or number buttons on
the remote control as explained above.
3. Press the MEMORY button.
Note:
Programmed details cannot be partially deleted or inserted.

MP3/WMA CD OPERATION

This unit can play back the CD-R/RW that has recorded music data, MP3
or WMA(Window Media Audio) files. Before playing back MP3/WMA CD.
Please read the following.
MP3/WMA CD information
- MP3/WMA CD is the disc that standardized by ISO9660, its file name
must have the extension letters, ".MP3" or ".mp3"/ ".WMA"or ".wma".
- Standard, sampling frequency, and the bit rate:
MP3 files:
MPEG-1 Audio
32 kHz, 44.1 kHz, 48 kHz
32 kbps ~ 320 kbps (constant bit rate or variable bit rate)
WMA files:
WMA version 7, 8 and 9
32 kHz, 48 kbps ~ 64 kbps
44.1 kHz, 48 kbps ~ 192 kbps
48 kHz, 128 kbps ~ 192 kbps
WMA9 professional files, WMA9 lossless files or DRM (copyright
protection) files cannot be played back.
- In this model, recommend recording setting for a high-quality sound
is 44.1 kHz of sampling frequency and 128 kbps of constant bit rate. If
files are recorded in other bit rate (for example: 320kbps) or in variable
bit rate, track -jump may sometimes happen according to recording
conditions.
- The directory and file names of the MP3/WMA CD must be
corresponded to the ISO standardized files.
- Single-session disc can be played back.
As for multi-session disc, only the first session can be played back.
- This unit can recognize up to 255 folders or 255 files per disc.
- This unit can recognize up to 8 directory trees per disc.
- Some MP3/WMA CD may not be played in the recorded order.
- Music section in "CD Extra" can be played back.
- Music files recorder by "Packet Writing" cannot be played back.
8