Bosch DCN multimedia 1.41 Release Notes page 7

DCN multimedia Release Notes 1.41 7
Issue:
When using the PTZ arrows in the Meeting Application the camera does not stop moving, if the
camera has firmware 5.73.
Solution:
Downgrade the camera to 5.72 firmware.
Issue:
Camera pre-positions cannot be set at the seats.
Solution:
Close the Meeting application. Remove the file:
C:\Users\«servername»\AppData\Local\Bosch\Bosch.Mmcn.UserInterfaces_...
Restart the Meeting application.
Bosch Security Systems| 2015-02-24