Makita BBX7600 Instruction Manual page 24

THINGS YOU SHOULD KNOW ABOUT THE EMISSION CONTROL SYSTEM WARRANTY
MAINTENANCE AND REPAIRS
You are responsible for the proper use and maintenance of the engine. You should keep all receipts and
maintenance records covering the performance of regular maintenance in the event questions arise. These
receipts and maintenance records should be transferred to each subsequent owner of the engine. Makita
reserves the rights to deny warranty coverage if the engine has not been properly maintained. Warranty
claims will not be denied, however, solely because of the lack of required maintenance or failure to keep
maintenance records.
MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES AND
SYSTEMS MAY BE PERFORMED BY ANY REPAIR ESTABLISHMENT OR INDIVIDUAL;
HOWEVER, WARRANTY REPAIRS MUST BE PERFORMED BY A DEALER OR SERVICE
CENTER AUTHORIZED BY Makita. THE USE OF PARTS THAT ARE NOT EQUIVALENT
IN PERFORMANCE AND DURABILITY TO AUTHORIZED PARTS MAY IMPAIR THE
EFFECTIVENESS OF THE EMISSION CONTROL SYSTEM AND MAY HAVE A BEARING
ON THE OUTCOME OF A WARRANTY CLAIM.
If other than the parts authorized by Makita are used for maintenance replacements or for the repair of
components affecting emission control, you should assure yourself that such parts are warranted by their
manufacturer to be equivalent to the parts authorized by Makita in their performance and durability.
HOW TO MAKE A CLAIM
All repairs qualifying under this limited warranty must be performed by a service dealer authorized by
MAKITA. In the event that any emission-related part is found to be defective during the warranty period, you
shall notify MAKITA at the following contacts and you will be advised of the appropriate warranty
service dealer or service providers where the warranty repair can be performed.
* For the nearest Makita service center, please visit
* For technical support or questions regarding operation of our tools and accessories call: 1-800-4-MAKITA
* Makita USA Inc. Corporate Office: 14930 Northam St. La Mirada, CA 90638-5753
(For Canada)
*For the authorized service center nearest you please refer to the local yellow pages directory under "tools", or
contact our customer service department Tel 1-800-263-3734(Canada only), or visit our web site
www.makita.ca
*Makita Canada Inc. Head Office & Plant: 1950 Forbes Street, Whitby, ON L1N7B7.
www.makitatools.com
24