The drain pump filter
❋ The drain filter collects threads and small objects left in the laundry.
Check regularly that the filter is clean to ensure smooth running of your machine.
First drain using the drain hose and then open the pump filter to
remove whatever any threads or objects.
Be careful when draining if the water is hot.
Allow the water to cool down before cleaning the drain pump, carrying out
emergency emptying or opening the door in an emergency.
1. Open the lower cover cap ( ) by using a
finger. Turn the drain plug ( ) to pull out the
2. Unplug the drain plug ( ), allowing the water
to flow out. At this time use a vessel to prevent
water flowing on to the floor. When water does
not flow any more, turn the pump filter ( )
open to the left.
3. Remove out any foreign material from the
pump filter ( ).
4. After cleaning, turn the pump filter ( )
clockwise and insert the drain plug ( )to the
original place. close the lower cover cap.