Checklist - GE GXRV10ABL01 Owner's Manual And Installation

Now That Your Reverse Osmosis System is Installed...Sanitize
Sanitize upon installation and after servicing inner parts, including replacement of
prefilter, postfilter and the Reverse Osmosis cartridge. It is important to wash hands with
anti-bacterial soap before handling inner parts of the system. See the Sanitizing the Reverse
Osmosis System and Purging the Reverse Osmosis System sections.
CAUTION: If installing unit in New Construction, ensure house plumbing is flushed
thoroughly before opening the water supply valve. Also, before sanitizing, be sure to
remove all cartridges as described in the Sanitizing the Reverse Osmosis System section.
Chlorine will destroy the Reverse Osmosis cartridge.
Installation Checklist
1. Are all tubing connections tightened? Do they run between the points shown? No leaks!
2. Did you use drain option B, C or D? Make sure the 3 ⁄ 8 ² drain tubing, from the faucet to
the drain point, is without loops, dips, or low-spots.
3. Is the water supply shutoff valve open?
4. Did you sanitize and purge the system?
17