Troubleshooting; Simple Check - Haier 32E2000 Service Manual

10. Troubleshooting

10-1 Simple Check

Please make these simple checks before calling service. These tips may save you time and money since
charges for receiver installation and adjustments of customer controls are not covered under your
warranty.
S y m p o t m s
No power
No picture
Good picture but no sound
Good sound but poor color
Poor picture
Snowy picture and noise
TV not responding to remote
control
TV not working
No le displayed in USB
mode
I e t m s o t
• Check if the TV's AC power cord is plugged into a working power
outlet.
• Unplug the TV, and wait 60 seconds. Then reinsert plug into the
working power outlet and turn on the TV again.
• Make sure correct input source is selected.
• Check antenna connection on the back of the TV to see if it is
properly connected.
• Possible broadcast station trouble. Try another channel.
• Adjust the picture contrast and brightness settings.
• Increase the volume level by pressing
control or VOL+ button on TV side control panel.
• Press button on the remote control to ensure mute is o .
• Adjust the contrast, color and brightness settings.
• Poor picture quality may occur when an activated S-VHS camera or
camcorder is connected to your TV and the other peripheral at the
same time. Switch o one of the peripherals.
• Check the antenna connection.
• Check whether the batteries are working. Replace if necessary.
• Make sure the remote control batteries are installed correctly.
• You can still use the control buttons on the side of your TV.
• Disconnect the TV from the power supply for 10 seconds, then
reconnect the TV. If the problem persists, contact authorised service
personnel for technical assistance.
• Make sure you select correct media type.
• Make sure the stored les are in supported format.
- 45 -
Service Manual
Model No.: 32E2000
C h e k c a n d A t c o i s n o t F
+ button on the remote
l o o l w