We will repair potential fail- Safety switch (B 40 C Bp) ures of your accessory within the warranty If the safety switch is released, the brush period free of charge, provided that such drive shuts off.
The next charging process will have an ac- Operator console Before Startup curate display and charge power and the batteries will be fully charged. Installing the Brushes Use the appliance until the deep discharge BD model protection switches off the brush motor and The disc brush must be installed before the the turbine after the initial charge of the bat- initial operation (see "Maintenance work").
With other detergents, the opera- floors the vacuum bar can be turned to an B 40 C Bp tor bears the increased risk regarding the op- oblique position of up to 5°. erational safety and danger of accident.
Setting the Advance Speed (BD cleaning Setting the parameters Drain off clean water head only) With yellow Intelligent Key Parameters for the different cleaning pro- grammes are preset in the appliance. Depending on the authorisation of the yel- low Intelligent Key, individual parameters can be changed.
Yearly Setting the language Maintenance schedule Have the prescribed inspection carried Press Info button - the set value blinks. Maintenance intervals out by the customer service. Set the desired language by turning the Recommended cleaning processes are Maintenance Works info button.
Page 9
Align the lift arm of the cleaning head with the intake on the top side of the cleaning head. Insert the safety pin and lock it into place. Adjust the cleaning head: to the de- sired position via the adjustment screw. ...
Recommended batteries, B 40 Removing the batteries Order No. Description CAUTION R isk of damage due to tipping appliance; 6.654-141.0 105 Ah - mainte- 12 V* remove batteries only if the appliance is nance-free equipped with a cleaning head. 6.654-093.0 70 Ah - maintenance- 12 V*...
Faults DANGER Risk of injury! Before working on the appli- ance, remove the Intelligent Key and the mains plug of the charger. Drain and dispose of the dirt water and the residual fresh water. Faults with display Display Remedy ERR_I_BÜRSTE_049 Check if foreign matters block the brushes;...
Accessory B 40 BR appliance B 40 (brush roller accessories) Description Part no.: Part no.: Description Working Working width width 450 mm 550 mm Brush roller, red (medium, stand- 4.762-392.0 4.762-393.0 Also for regular cleaning of heavily dirtied floors. ard) Brush roller, white (soft) 4.762-405.0 4.762-409.0 For polishing and cleaning sensitive floors.
Product: Floor cleaner Phone: +49 7195 14-0 – For additional information about spare Type: B 40 C Bp Fax: +49 7195 14-2212 parts, please go to the Service section B 40 W Bp at www.kaercher.com. Relevant EU Directives...