Advertisement
Cleaning the motor filter
The motor filter prevents particles and larger objects from entering the motor
housing. The filter is re-usable and should be cleaned regularly.
Open the cover (20). Remove the dust bag (21) from the appliance. Empty the
container (24-25). Slide the filter cover up and out of the appliance. Clean the filter.
Replace the filter, and close the cover.
Warning! Do not use a brush or compressed air to clean the filter.
Replacing the HEPA filter
To change the HEPA filter, press the latch (16) and open the
dust-bag compartment.
Fig. 28: Pull the HEPA filter from its location & replace it with a new
one. Close the dust-bag compartment. The HEPA filter should be
replaced every 6 to 9 months or if worn or damaged.
Helpful Hints
• Do not immerse the appliance, cord set or plug in liquids
• Do not block the vents at the back of the unit
• Always keep the brush, crevice tool and other accessories away from the body
while the unit is in operation
• Use extra care when cleaning stairs. Always start at the bottom stair & work up.
• Use caution when vacuuming at top of stairs, near children, etc.
• Always be aware of the position of the power cable and hose so as to avoid a
tripping hazard during use
• Do not use this appliance on animals
• Disconnect the product from the electrical supply before emptying, cleaning or
carrying out any maintenance on the appliance
Technical data
Voltage (Volts)
Power input (Watts)
Cable length (metres)
Carton size (litres)
Weight (kilograms)
-7-
28
VM1000
230
2,000
6.0
TBA
7.4
Advertisement
