Magnavox ZV427MG9 A Owner's Manual page 34

4
Use [K / L / s / B] or [the Number
buttons] to enter the start and end
time, then press [B].
Date Start
JAN/02
12 : 00AM
L1/L2 REC To
L1 DVD
• You cannot make a program which recording
time exceeds 12 hours.
5
Use [K / L] to select the appropriate
external input position (L1 / L2) to
which your external tuner is
connected, then press [B].
Date Start
JAN/02 12 : 00AM
REC To
L1/L2
L1 DVD
6
Use [K / L] to select the recording
media ("DVD" or "VCR"), then press
[B].
e.g.) recording to DVD
Date Start
JAN/02 12 : 00AM
REC To
L1/L2
L1 DVD
7
Use [K / L] to select a recording mode.
Date Start
JAN/02 12 : 00AM
L1/L2 REC To
DVD
L1
Refer to "Recording Mode" on page 27.
• When recording to DVD, you can check the
remaining recordable space of the disc when
you select the recording mode.
Date Start
JAN/02 12 : 00AM
REC To
L1/L2
L1 DVD
Auto recording mode select (DVD only)...
When "Auto" is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available
automatically to complete recording the program.
Date
JAN/02
L1/L2
L1
• "Auto" is only available for one program in the timer
program list.
• The recording may be cut short when the available
recording space of the disc is too limited.
32 32 EN EN
TIMER RECORDING
End
- - : - -
Mode
SP
SP 2h00m
End
1 : 00AM
Mode
SP
SP 1h00m
End
1 : 00AM
Mode
SP
SP 1h00m
End
1 : 00AM
Mode
SP
SP 1h00m
End
1 : 00AM
Mode
SP
SP 1h00m
Start End
1 : 00AM
12 : 00AM
REC To Mode
DVD Auto
Auto 1h00m
8
Press [OK] when all items are entered.
After displaying an instructive message for 10
seconds, timer program list will appear.
Press TIMER SET to Timer Standby mode.
When Timer set on DVD or VCR,
it is not available in the standby mode.
Press TIMER SET to cancel the Standby mode.
Timer Programming
JAN/ 2/09 12:00 AM L1 SP
SP (1:00)
Date Start
JAN/02 12:00AM 1:00AM
Your program setting is now stored.
• To set another program, repeat steps 2 to 8.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
"Timer program overlapped" appears, and the
overlapped program will be displayed in blue.
• To correct the timer program refer to
"Checking, canceling, or correcting the timer
programming information" on page 33.
9
Press [TIMER SET] to set a timer
programming.
will appear on the front panel display, while
this unit waits to make the recording.
CS
"VCR" will appear on the front panel display if
VCR timer recording have been set.
THU JAN/01 11:00AM
End L1/L2
L1
DR CD
HDD
DVD