Magnavox MWR20V6 Owner's Manual page 78

Symptom
There is no picture.
Picture noise appears.
There is no sound.
Sound is noisy.
No DTS sound is output.
The unit does not play back the
disc.
Playback image freezes for a
second.
D
V
The disc does not start playback
D from the beginning.
The unit starts playing back the disc
automatically.
Some functions such as Stop,
Search, or Slow-motion Play
cannot be performed.
The language for the sound track
cannot be changed.
The subtitle language cannot be
changed or turned off.
The angles cannot be changed.
Recording does not stop immediately
after you press [STOP C].
Recording does not start immediately
after you press [DVD REC I].
The disc tray does not open when
you press [OPEN/CLOSE A].
78 EN
Others
Troubleshooting (cont'd)
xxxx
Remedy
• If Setup menu appears on the TV screen, press [RETURN] (or
[SETUP]) to exit.
• The disc is dirty or flawed.
• If the picture output signal from the unit passes through your VCR
before reaching your TV, or if you are connected to a combination
TV/VIDEO player, the copy-protection signal applied to some DVD
programs could affect picture quality. If you still experience this
problem even when you connect the unit directly to your TV, try
connecting the unit to your TV's S-VIDEO input.
• If the audio signal does not come through the DIGITAL OUT
(COAXIAL) jack, check the Audio settings (pages 69-70).
• The disc is dirty or flawed.
• The disc is dirty or flawed.
• This unit is not compatible with DTS sound.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot playback certain discs (such as a CD-ROM) (page 41).
• The region code on the DVD-Video does not match the ones on the
unit (page 41).
• Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on for about two hours until the moisture
evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot play
back the disc unless it is finalized (pages 26, 37).
• During the playback of two layered disc, picture may freeze for a
moment when the 1st layer switches to the 2nd layer. This is not a
malfunction.
• Resume play was activated (page 45). Press [STOP C] twice.
• You have inserted a disc whose Title menu or DVD menu
automatically appears on the TV screen when it is first insert.
• The DVD-Video features an auto playback function.
• Depending on the disc, you may not be able to do some of those
operations. See the instruction manual supplied with the disc.
• Multilingual tracks are not recorded on the DVD-Video, DVD-R or
DVD-RW being played back.
• The DVD-Video prohibits the changing of the language for the
sound track.
• Try changing the language using the DVD-Video's menu.
• Multilingual subtitle are not recorded on the DVD-Video.
• The DVD-Video prohibits changing of the subtitles.
• Try changing the subtitles using the DVD-Video's menu.
• Multi-angles are not recorded on the DVD-Video being played back.
• The angle-change operation is possible as long as the disc
contains a multi-angle portion. Actual change can be performed
when the portion has come up.
• The DVD-Video prohibits changing angles.
• Try changing the angles using the DVD-Video's menu.
• It will take a few seconds for the unit to input disc data before
recording can stop.
• A brand-new DVD+RW/DVD-RW has been inserted. It takes a
while for the unit to automatically format a DVD+RW/DVD-RW.
• It may take a few seconds for the disc tray to open after you have
recorded or edited a disc. This is because the unit is adding disc
data to the disc.