Mod Fx - Williams ALLEGRO 2 Owner's Manual

1. Press the Function button.
2. Turn the Value Dial to select the Chorus depth
edit menu, the display will show "C .Depth".
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Select the depth range (0-127).
C.Depth

MOD FX

Modulation effects are designed to add unique
playable sound effects to voices.
In addition to the sounds, the Allegro 2 has a
new effects section that will allow users to have
more control over their sounds called Mod FX.
These new effects will be inserted into the audio
pathway of the sound to the mixer and will be
preset into the Patch. When you switch on the
specific patch a preset effect will be associated
with the sound. You can then select whether the
effect should be turned off or modified.
The Mod FX Are:
Bank1 Bank2
Piano Piano - Bright
Electric Piano Electric Piano2
Organ Organ2
Pad - Strings Pad - Synth
Acoustic Electric Bass
Bass
14
To turn on the Mod FX function for an instrument
press the ModFx button. The effect will become
active and the ModFx LED will light.
To turn off the the ModFx, press the button
again. The LED on the button will turn off.
Rotary
There is a rotary effect, which is designed
for organ voices. To select the speed of the
rotary, press the sustain pedal with your foot.
Holding down the pedal will speed up the rotary
voice to a tremolo. When the pedal is released,
the speed of the tremolo will slow down to a
choral setting.
Rotary Speed Mode
As a default, the Rotary Speed mode is
assigned to "PEd". This mode allows you to
change the Rotary Speed by using a foot pedal.
Note that the sustain will not hold the sound
when your hands are off the keys in this mode.
In "SLW" mode, the speed is assigned to be
slow. The sustain pedal will work to sustain
the sound.
Mod FX
The last mode is "FST", the speed is assigned
to be fast. The sustain pedal will also sustain
Tremolo
the sound.
Vibrato
To Change The Rotary Speed Settings In The
Rotary -
Function Mode
Fast/Slow -
Change with
1. Press the Function button.
Sustain Pedal
2. Turn the Value Dial to select the Rotary
Tremolo
None
RotSpeed
Speed Mode edit menu, the display will
show "RotSpeed".
O W N E R ' S MAN UAL