Related Manuals for Makita BO5030
Summary of Contents for Makita BO5030
- Page 1 INSTRUCTION MANUAL Random Orbit Sander BO5030 BO5031 009107 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
) : 4.0 m/s without earth wire. Uncertainty (K) : 1.5 m/s ENH101-13 For European countries only EC Declaration of Conformity Makita Corporation responsible manufacturer declare that the following Makita machine(s): Designation of Machine: Random Orbit Sander Model No./ Type: BO5030,BO5031... - Page 3 are of series production and Avoid body contact with earthed or grounded Conforms to the following European Directives: surfaces such as pipes, radiators, ranges and 98/37/EC until 28th December 2009 and then with refrigerators. There is an increased risk of 2006/42/EC from 29th December 2009 electric shock if your body is earthed or grounded.
-
Page 4: Sander Safety Warnings
GEB021-4 17. If devices are provided for the connection of dust extraction collection facilities, SANDER SAFETY WARNINGS ensure these are connected and properly used. Always use safety glasses or goggles. Use of dust collection can reduce dust-related Ordinary eye or sun glasses are NOT safety hazards. - Page 5 Installing or removing abrasive disc CAUTION: Before plugging in the tool, always be sure that the • tool is switched off. To start the tool, press the "I (ON)" side of the switch. To stop, press the "O (OFF)" side of the switch. Speed adjusting dial For BO5031 only 1.
- Page 6 After emptying the dust bag, install the dust nozzle on 1. Notch the dust bag. Turn the dust nozzle slightly clockwise to 2. Guide lock it in place. Then install the dust bag on the tool as described in "Installing dust bag". 1.
-
Page 7: Maintenance
CAUTION: 1. Latch The sanding pad rotates clockwise during the 2. Dust nozzle • loaded operation, rotate counterclockwise during the no-load operation. MAINTENANCE CAUTION: Always be sure that the tool is switched off and 009092 • unplugged before attempting to perform inspection Remove the dust nozzle by pushing the two latches. - Page 8 Makita Corporation Anjo, Aichi, Japan 884832B227...