Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
Maintenance
Your Black & Decker power tool has been designed to
operate over a long period of time with minimal
maintenance. Continuous satisfac tory operation depends
upon proper tool care and regular cleaning. Do not repair the
tool your self. Please send your tool to authorized Black &
Decker service centers for regular maintenance and service,
or when a significant change in performance is observed.
Carbon Brushes
Carbon brushes (Fig. F)
Remove and check carbon brushes regularly. Replace when
they have worn down to about 6mm or less. Keep carbon
brushes clean for free movement in the holder. Both carbon
brushes should be replaced at the same time. Use only
Black & Decker carbon brushes. Use a slotted screwdriver to
remove brush caps (5). Remove worn brushes, insert new
ones, and secure the brush caps.
Cleaning
Warning: Unplug the tool before you use a
cloth to clean the housing. With the motor
running, blow dirt and dust out of all air vents
with dry air at least once a week. Wear safety glasses when
per forming this. Exterior plastic parts may be cleaned with a
damp cloth and mild detergent. Although these parts are
highly solvent resistant, NEVER use solvents.
Tool Care
Avoid overloading the power tool. Overloading will result in a
considerable reduction in speed and effi ciency and the tool
will over heat. In this case, run the power tool at no load for
a minute or two until cooled to normal working temperature
by the built in fan. Switching your tool on and off whilst under
load will considerably reduce the life of the tool.
Important
To ensure product safety and reliability, repairs, maintenance
and adjustment (other than those listed in this manual)
should be performed by authorized service centers or other
qualified orga nizations, always using identical replacement
parts. Unit contains no user serviceable parts inside.
8
Accessories
The performance of any power tool is dependent on the
accessory used. Black & Decker acces sories are engineered
to high quality standards and are manufactured from the best
materials.
Stringent tests are performed before the accesso ries are
launched in the market. They are designed to enhance the
performance of power tools.
Purchase Black & Decker accessories to bring your Black &
Decker power tools to greater performance. Recommended
Black & Decker accessories are available at your local
authorized dealers or service centers.
Black & Decker offers a large selection of accessories at your
local dealer or authorized service center.
Note: Use only wheels rated at least equal to the
maximum speed marked on the tool.
Warning: The use of any other accessory not
recommended for use with this tool could be haz
ardous.
Warning: Only stone-cutting diamond wheel can
be used. Do not use grinding wheel or toothed
blades.
Technical Data
SPECIFICATION
Voltage
Frequency
Power
Rated speed
Wheel diameter
Wheel thickness
Max. depth of cut
Spindle thread size
Weight
Cable length
Max permissible water pressure bar
BPSP125
V
220-240
Hz
50/60
W
1,320
/min
13,500
mm
125
mm
2
mm
41
M7
kg
3.1
m
4.0
3.0
Advertisement
Table of Contents
