Barco G2100 Series Replacement Procedure

LCD Panel Replacement for G2100 series
LCD Panel Replacement Flow Chart
LCD PANELS ARE VERY SENSITIVE DEVICES.

Handling Precautions:

Precautions when Mounting:
Service Instructions
OBSERVE FULL PRECAUTIONS FOR
HANDLING ELECTROSTATIC SENSITIVE
For more information about handling electrostatic sensitive devices, see Service manual
chapter 'Safety Precautions'.
Precautions
- The LCD module is a glass plate product and is easily damaged by stress.
- The LCD module should be handled with care. Do not touch the glass surface
and the anti-reflective coating. Hold only by the surrounding metal plate
.
- Make sure not to apply DC voltage to the product. Module functions are degraded.
- The appropriate ANTISTATIC PROTECTION steps should be taken in handling
the LCD module.
- Power down the projector and unplug the power cord before starting the
replacement.
- In case of LCD panel breakage, avoid contact with the liquid. It is harmful if
swallowed. Avoid contact with the eyes, skin, or clothing. In case of contact, flush
the area with water. Then wash the area with soap and water.
- Immediately wipe off any liquid spilled on the display area because its adherence
may cause deformation or color spots.
- Do not touch the display area and contact terminals with bare hands. Finger prints
will cause a smeared image on the screen and could lead to poor connections on
the flex foil contacts.
WARNING
DEVICES.
Date: 22/09/98 R808293K - R809419K
R808293K
R809419K
Art. No: R5975578 Rev. 01
1