Install the guide rail adapter on the rail of the guide rail.
Insert the rule bar into the square hole of the guide rail
adapter. Put the base to the side of the guide rail, and
secure the bolt securely.
Always use blades No. B-8, B-13, B-16, B-17 or
58 when using the guide rail and the guide rail
Use the cover plate when cutting decorative veneers,
plastics, etc. It protects sensitive or delicate surfaces
from damage. Fit it on the back of the tool base.
2. Rule bar
2. Guide rail
3. Guide rail
1. Cover plate
For splinter-free cuts, the anti-splintering device can be
used. To install the anti-splintering device, move the tool
base all the way forward and fit it from the back of tool
base. When you use the cover plate, install the anti-
splintering device onto the cover plate.
The anti-splintering device cannot be used when
making bevel cuts.
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
Never use gasoline, benzine, thinner, alcohol or
the like. Discoloration, deformation or cracks may
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Jig saw blades
Hex wrench 4
Rip fence (guide rule) set
Guide rail adapter set
Guide rail set
Hose (For vacuum cleaner)
Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.