Related Manuals for Marksman M10
Summary of Contents for Marksman M10
- Page 1 M10UM 2/20/02 12:26 PM Page 1 User’s Manual Model: M10 For Technical Assistance (800) 638-3600 For Fax on Demand Technical Assistance (800) 994-9977 (Must be a Registered Dealer to Use Fax on Demand System) © Copyright 2002 Magnadyne Corporation...
-
Page 2: Operation
M10UM 2/20/02 12:26 PM Page 2 Congratulations on your purchase of a quality Marksman automotive security and remote start system. The information enclosed will provide a ready reference of the operation and maintenance of your new Marksman security and remote start system. Operation Regular Transmitter Operation Transmitter... - Page 3 M10UM 2/20/02 12:26 PM Page 3 Second Vehicle Transmitter Programming: (Random code transmitters does not have this feature) Your 8-button remote transmitter can be utilized to control a second vehicle security system. To program the remote control transmitter to a second vehicle, follow the instructions for Transmitter programming.
- Page 4 M10UM 2/20/02 12:26 PM Page 4 Active Arming (Lock and Arm) 1. Press ( ) button on the transmitter. 2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The vehicle doors will lock upon arming when interfaced with the security system. Door Ajar System Arm Defective Sensor Reminder:...
- Page 5 M10UM 2/20/02 12:26 PM Page 5 Active Arming (Lock and Arm) Arming While Driving:(See Alarm Feature Programming Part 1-6) Your system can be armed while driving the vehicle! Simply press ( while the vehicle is running, or the ignition is on. the system will chirp once and then once more to indicate the ignition is on.
- Page 6 M10UM 2/20/02 12:26 PM Page 6 Active Disarming (Unlock and Disarm) Optional Sensor Trigger Ignition Trigger Tamper Disarming: If alarm triggered, upon disarm the system, siren chirp 4 times, parking light flash 3 times. Pathway Illumination: (See Alarm Feature Programming Part 2-4) This feature turns the parking light "ON"...
- Page 7 M10UM 2/20/02 12:26 PM Page 7 Valet Mode (System in Disarmed or Valet Mode) The valet switch allows you to temporarily bypass all alarm function, eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm function and remote start function are bypassed, however the remote panic feature and remote door locks will remain operational.
- Page 8 M10UM 2/20/02 12:26 PM Page 8 Trigger the System When armed, your vehicle is protected as follows: 1. Light impacts will trigger the warn-away signal. A (3) long chirp from siren/horn. 2. Heavy impacts, doors open, hood open, trunk open/turn on the ignition key, activate PIR sensor, activate door/window sensor, will trigger the programmed sequence.
- Page 9 M10UM 2/20/02 12:26 PM Page 9 Anti Car-Jacking Passive Car Jack: It operate as below: 1. Turn the ignition switch to "ON", the system will arm. 2. Once the system is armed, if you are forced from the vehicle, the system will trigger when the door is opened and closed while the ignition is "ON".
-
Page 10: Remote Start Operation
M10UM 2/20/02 12:26 PM Page 10 System's Status Check When you want to check the system's present status thru the LCD screen, press the ( on the "Two Way LCD Screen Transmitter". With one melody sound, the system's status will be shown on the LCD screen. - Page 11 M10UM 2/20/02 12:26 PM Page 11 Remote Start the Vehicle Melody sound from 2-way LCD Transmitter when remote start is activated. Note: The remote start unit will not start the vehicle if any one of the following conditions exists: 1. The hood is opened. 2.
- Page 12 M10UM 2/20/02 12:26 PM Page 12 Timer/Temperature Start 24 hours timer start: This feature is design for a battery charge usage. When the car owner has a long vacation, he can use this feature to auto start the vehicle and charge the battery every day, to prevent a low battery.