Other Scanning Problems; Cannot Scan In Full Auto Mode In Epson Scan; Thumbnail Preview Does Not Work Properly; Scanning Is Too Slow - Epson L220 User Manual

User's Guide
Related Information
"Uninstalling Applications" on page 63
&
"Installing Applications" on page 64
&

Other Scanning Problems

Cannot Scan in Full Auto Mode in EPSON Scan

❏ You cannot scan to PDF/Multi-TIFF format continuously in Full Auto Mode. Scan in a mode other than Full
Auto Mode.
❏ See the EPSON Scan help for other way of solving problems.

Thumbnail Preview Does Not Work Properly

See the EPSON Scan help.
Related Information
"EPSON Scan (Scanner Driver)" on page 61
&

Scanning Is Too Slow

Lower the resolution.

Scanning Stops when Scanning to PDF/Multi-TIFF

❏ When scanning large volumes, we recommend scanning in grayscale.
❏ Increase the free space on the computer's hard disk. Scanning may stop if there is not enough free space.
❏ Try scanning at a lower resolution. Scanning stops if the total data size reaches the limit.

Other Problems

Slight Electric Shock when Touching the Printer

If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.

Operation Sounds Are Loud

If operations sounds are too loud, enable quiet mode. However, this may slow down printer operations.
❏ Windows printer driver
Select On as the Quiet Mode setting on the Main tab.
Solving Problems
78