TP-Link M5350 User Manual page 33

the device.) You can rename it as your preference, but the value is limited to 32 characters
at most and also it is case-sensitive (For example, TEST is NOT the same as test.). Later
on it will displays in the wireless network list searched by your devices.

Enable SSID Broadcast: Select to enable or disable this function. When wireless clients
search the local area for wireless networks to associate with, they will detect the SSID
broadcast by the device. If you Enable SSID Broadcast, the Wireless device will broadcast
its name (SSID) on the air; otherwise, you have to manually type in the SSID and then you
can join its network.

Region: Select your region from the drop-down list. This field specifies the region where
the wireless function of the device can be used. It may be illegal to use the wireless
function of the device in a region other than one of those specified in this field. If your
country or region is not listed, please contact your local government agency for assistance.

Channel: This field determines which operating frequency ranging from 1~11 will be used.
If you select Auto, then the device will choose the best channel automatically. It is not
necessary to change the wireless channel unless you notice interference problems with
another nearby access point.

Wireless Mode: You are provided with two wireless modes here: 11bg Mixed and 11bgn
Mixed. The default wireless mode is 11bgn Mixed. If your wireless network card didn't work
well in 11bgn Mixed mode, try 11bg Mixed mode.

Wireless Security: You are provided with two modes of wireless security here: Not
Secured, WPA-PSK/WPA2-PSK.
WPA-PSK/WPA2-PSK: It's the WPA/WPA2 authentication type based on pre-shared

pass phrase. It's easy to set and secure to use. So it's perfect for SOHO users.
Wireless Password: The default WPA key is the last 8 characters of IMEI. You can
keep it default or enter at least 8 ASCII characters or 8 hexadecimal characters as
your new Wireless Password.
 WiFi Auto-disable Time: If no clients connect to the device's wireless network in a period
of time (15 minutes by default), the Wi-Fi will be shut down. You can press the power
button to resume the Wi-Fi.
Click Save to save your settings.
4.4.2.2. MAC Filter
The Wireless MAC Address Filtering feature allows you to control the wireless stations
accessing the device, which depends on the station's MAC addresses. MAC Address is the
physical address of the wireless stations, usually in the format of XX-XX-XX-XX-XX-XX format
(X is any hexadecimal digit).
M5350 3G Mobile Wi-Fi User Guide
-26-