Download  Print this page

Kenwood CMM480 series Instructions Manual page 7

Hide thumbs

Advertisement

l
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
l
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
1 Wash the parts: see 'care and
cleaning'.
2 Run two full tanks of water (without
coffee) through the coffee maker to
clean it out. See 'to make coffee'.
key -
CMM480
permanent filter
filter holder
anti-drip valve
lid tab
water tank (max 1500mls)
hotplate
on/off button with indicator
measuring spoon
glass carafe
key -
CMM490
permanent filter
filter holder
anti-drip valve
lid tab
water tank (max 1250mls)
location plate
on/off button with indicator
measuring spoon
lid release lever
thermal carafe
Note: the glass carafe is
only suitable for use with
the CMM480 coffee maker
model and the thermal
carafe is only suitable for
use with the CMM490 coffee
maker model. The glass and
thermal carafes are not
interchangeable.
to make coffee
1 Lift the lid using the tab
front of the coffee maker.
2 Fill the tank with the desired amount
of water. The water level must be
between the 125mls and MAX mark.
Do not overfill above the MAX level.
Models
CMM480 series
CMM490 series
l
Use cold water. We recommend
using filtered water as it reduces
limescale and prolongs the life of
your coffee maker. Never use warm
or fizzy water.
3 Ensure the filter holder is positioned
correctly.
4 Fit either the permanent filter
supplied or a paper filter into the
filter holder. Add the coffee using the
spoon supplied (approximately 1
level spoon (7g) per cup to taste).
5 Close the lid and put the carafe on
the hotplate/location plate
Note: Ensure the lid is fully
closed. If the lid is not closed
down correctly the anti-drip
valve will not operate causing
the filter holder to overfill,
resulting in water spillage
from out of the holder area.
6 Plug in and switch on.
7 Don't remove the carafe until
brewing has finished.
CMM490 Thermal carafe - to
pour coffee from the carafe, push
the lid release lever
empty and clean the carafe, remove
the lid by turning the lid release lever
anti clockwise
8 When the carafe is empty, switch off
and unplug the appliance.
5
at the
Min
Max
125mls 1500mls
125mls 1250mls
.
down
. To
and lift off.

Advertisement

Table of Contents
loading

  Also See for Kenwood CMM480 series

This manual is also suitable for:

Cmm490 series