Installation; Removal Of Transport Bracket - Whirlpool AWE 7515 Owner's Manual

IFU-TL HR GB.fm Page 16 Friday, November 7, 2008 2:30 PM

INSTALLATION

Black process 45.0° 100.0 LPI
Downloaded From WashingMachine-Manual.com Manuals

Removal of transport bracket

The washing machine is fitted with a transport bracket to
avoid any possible damage during transport.
IMPORTANT: Before using the washing machine, the
transport bracket at the back MUST be removed.
1. Unscrew the two screws "A" and the four screws "B"
with a flat screwdriver or a No. 8 hex nut box spanner.
2. Remove the transport bracket.
3. Replace the four outer screws "B" on the machine and
tighten them.
4. Clip the two seals "C" supplied into the openings "D" of
the washing machine.
Note: do not forget to replace and tighten the four
outer screws.
A
D
C
GB 16
B
1
1
1
2
4
D
4